You are here: Home » Products » Petroleum Analysis Instrument » Distillation Tester » DSHD-0165 Vacuum Distillation Tester

Product Category

Share to:

DSHD-0165 Vacuum Distillation Tester


Product Description

DSHD-0615 Asphalt Wax Content Tester

DSHD-0615 Asphalt Wax Content Tester is designed and developed as per the Industry Standard of People’s Republic of China SH/T0425 “Test Methods for Wax Content of Asphalt”, as well as T0615-2000 “Asphalt Wax Content Test” in JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering.
DSHD-0615 Asphalt Wax Content Tester is applied to determine wax content in the petroleum asphalt, petroleum asphalt derived from crude oil under decompression condition and highway petroleum asphalt.
DSHD-0615 Asphalt Wax Content Tester is the best asphalt wax content analysis instrument in the petrochemical industry, building construction industry, highway construction industry, and other industries.

Main technical features
1. DSHD-0615 Asphalt Wax Content Tester adopts distillation and cooling methods to determine wax content of sample. The instrument is divided into upper and lower sections: The upper section contains stirring motor, temperature sensor, air circuit distributor, and sample container hook holder; the lower section is cooling and filtering parts.
2. DSHD-0615 Asphalt Wax Content Tester adopts floor-standing structure. The instrument can make determination for 3 pieces of samples at the same time, all in all it is efficient.
3. The air circuit distributor and sample container hook holder are specially designed, and  it is convenient to operate the instrument.
4 The constant temperature bath adopts Dewar flask of large diameter, it is with better heat insulation performance, there is no mist appears on observation window, and convenient for observation.
5. The temperature controller is precise, clear, and convenient to preset controlling temperature. The instrument has high temperature controlling accuracy, rapid cooling speed, and convenience.

Main technical specifications and parameters
1. Power supply: AC 220V±10%, 50 Hz
2. Heating power: 700 W
3. Cooling power: 1000 W
4. Rotation speed of stirring motor: 1200 RPM
5. Temperature sensor: Pt100
6. Cooling medium: F22
7. Temperature controlling accuracy: ±0.5℃
8. Working environment:
 (1) Ambient temperature: -10 ℃~30 ℃
 (2) Relative humidity: <85%
9. Total power consumption: not more than 1800 W

Technical Data Sheet

I. Main technical features
1. This instrument is desktop structure. It is composed of distillation test part and vacuum process part. It can meet requirements of SH/T 0165
2. The power of the heating furnace can be adjusted continuously. It equips a cooling device to make the heating furnace cooled down rapidly after determination. It is convenient for next test.
3. The vacuum pump has good effect. The max residual pressure is 2mmHg.
II. Main technical specifications
SN.  Item  Parameter
1  Power supply  AC 220 V±10%, 50 Hz
2.1  Heater for distillation flask  1000W
2.2  Heater for receiver  350W
3  Heating power for distillation flask  (0~1000)W, adjustable
4  Temperature range for air bath of receiving flask  Ambient to 100℃, adjustable
5  Temperature sensor of air bath  Pt100, RTD
6  Temperature control mode for air bath  Digital temperature controller
7  Temperature control precision  Set temp. ±1 ℃
8  Capacity of buffer vessel  1000 ml
9  Max. residual pressure  2mmHg          
10  Illumination light in the air bath  Energy saving lamp  
11  Working condition
11.1  Ambient temperature  (5~35)℃
11.2  Relative humidity  ≤85%

Tel: 86-756-8305811  Email: admin@dshing.com  
Copyright  2016 Dshing Instrument Co.,Ltd. All rights reserved.    Site Map   Hot Links