You are here: Home » Products » Petroleum Analysis Instrument » Carbon Residue Tester » DSHD-268 Carbon Residue Tester (Conradson Method)

Product Category

Share to:

DSHD-268 Carbon Residue Tester (Conradson Method)


Product Description

DSHD-268 Carbon Residue Tester
  (Conradson Method)
The instrument is designed and made as per national standard of People’s Republic of China GB/T268 Standard Test Method for Carbon Residue of Petroleum Products by Conradson Method. It is used to determine the amount of carbon residue of petroleum products after evaporation and pyrolysis, so as to check coke forming property of petroleum products.It can also meet requirements of ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products.

Technical Data Sheet

I. Main technical features
1. The design can totally meet requirements of standard GB/T 268. 
2. Simple design. Accessories complete. The test can be done as loon as equip civil gas. 
II. Main technical specifications
SN.  Item  Parameter
1  Porcelain crucible  About 30ml.
2  Inner iron crucible  About (75±5)ml.
3  Outer iron crucible  About(190±10)ml with cover.
4  Supporter  Height: (250±10)mm   Bore diameter: Ф(130±5)mm
5  Flame shield
5.1  Diameter of upper port  Ф(90±2)mm
5.2  Diameter of upper port  Ф(82±2)mm
6  Round iron cover
6.1  The height of underpart  (50~53)mm
6.2  The height of cone  in the middle  (25±2)mm
6.3  There is a piece of iron wire as the fire bridge on the top.
6.4  The height is (50±3)mm.It is regarded as the indicator of max height.
7  Blowtorch   It adopts gas torch .
8  Dimension  Ф130mm×400mm

Tel: 86-756-8305811  Email: admin@dshing.com  
Copyright  2016 Dshing Instrument Co.,Ltd. All rights reserved.    Site Map   Hot Links