You are here: Home » Products » Lubricating Oil Tester » DSHD-4929A Dropping Point Tester

Product Category

Share to:

DSHD-4929A Dropping Point Tester


Product Description

DSHD-4929A Dropping Point Tester
(Oil bath)


The instrument is designed and made as per the national standard of People’s Republic of China GB/T 4929 Lubricating grease- Determination of Dropping Point and ASTM D566 Standard Test Method for Dropping Point of Lubricating Grease.

I. Main technical features
1. The oil bath is composed of heat resistant beaker, heater and electric motor. The heating power can be adjusted continuously. The temperature in oil bath is uniform.。
2. Desktop structure. Easy to operate.
II. Main technical specifications

Technical Data Sheet

Main Technical Parameters
SN.  Item  Parameter
1  Power supply  AC 220 V±10%, 50 Hz
2  Oil bath  600 ml beaker.
3  Grease cup  Made of chrome plated brass. Its inner diameter is about 9.92 mm and 
the diameter of orifice for dropping oil is 2.8 mm.
 The height of the cup is about 12 mm.
4  Test tube  A tube made of heat-resistant glass with rim. Its inner diameter is 11.1 mm to 12.7 mm. 
 There are three indentations at 19 mm from the bottom, equally spaced on the circumstance. 
 These indentations are used for supporting the grease cup.
5  Thermometer  -5℃~300 ℃,scale value is 1 ℃.
6  Heater  Tubular. Power 800 W.
7  Stirring motor  Rotating speed 60 RPM
8  Ambient temperature  -10℃~+40 ℃
9  Relative humidity  ≤85%
10  Maximum power consumption  900 W
11  Dimension  350mm×180mm×410mm

Tel: 86-756-8305811  Email: admin@dshing.com  
Copyright  2016 Dshing Instrument Co.,Ltd. All rights reserved.    Site Map   Hot Links