DSHD-261A Automatic Pensky-Martens Closed Cup Flash Point Tester
Product Description
Summary
This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
Technical Data Sheet
I. Main technical features
1. Simulation tracking displays function curves of heating up and test time.
2. Equipped with the English prompt function of mis-operation.
3. Equipped with prompt function of test date,test time and other parameters.
4. Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.
5. Differential coefficient detection.Automatically correct the system deviation.
6. Automatically open the lid,detect the flash point and print test data.
7. The test arm rises up and lowers down automatically.
8. Igniting with electric igniting gun,forced air cooling.
| SN. | Item | Parameter |
| 1 | Power supply | AC 220V±10%, 50 Hz; |
| 2 | Temperature measurement | |
| 2.1 | Full scale | Room temperature～300℃; |
| 2.2 | Repeatability | ≤2℃; |
| 2.3 | Reproducibility | ≤4℃; |
| 2.4 | Resolution | 0.1 ℃; |
| 3 | Temperature rising rate | |
| 3.1 | Procedure A | (5～8)℃/min |
| 3.2 | Procedure B | (1～1.5)℃/min; To be controled automatically. Can be adjusted manually. |
| 4 | Stirring rate | |
| 4.1 | Procedure A. | (90～120)RPM |
| 4.2 | Procedure B. | (250±10)RPM To be controled automatically. Can be adjusted manually. |
| 5 | Ignition mode | Gas flame |
| 6 | Working environment | |
| 6.1 | Ambient temperature | 10℃～40℃; |
| 6.2 | Relative humidity | ≤80%; |
| 7 | Total power consumption | ≤500 W; |
| 8 | Overall dimension: | 410mm×360mm×310mm(when the lifting arm not rise) |