DSHD-3536 Cleveland Open-Cup Flash Point Tester
Product Description
Summary
This instrument is designed and made as per standards GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland Open Cup Method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.
Technical Data Sheet
I. Main technical features
1. It adopts special heating furnace to ensure the safety of test. The heating power is continuously adjustable.It can meet requirements of test.
2. The instrument adopts desktop structure.The stainless steel working table and furnace shell make it beautiful and elegant.
3. The instrument is fully self-contained complete.The operator can do determination as long as connecting with coal gas or other civil gas.
4. It equipped with flame extinguishing cover which accord with requirements of test.
II. Main technical specification and parameters
| SN. | Item | Parameter |
| 1 | Power supply | AC 220 V±10%, 50 Hz |
| 2 | Heating device | The instrument uses quartz tubular furnace for heating. No flame; explosion protective. The heating power can be adjusted from 0 to 600 W continuously. |
| 3 | Flame application device | Automatic |
| 4 | Thermometer | -6～400 ℃, the graduation scale is 2 ℃. It is in accord with GB/514 “Technical Specification of Thermometer Used for Petroleum Products Test”. |
| 5 | Ignition device | |
| 5.1 | Ignition source | Coal gas |
| 5.2 | Aperture of spout | 0.6～0.8 mm |
| 6 | Ambient temperature | -10 ℃～50 ℃ |
| 7 | Relative humidity | ≤85% |
| 8 | Power consumption | Not more than 650 W |