TLSA Camera Probe for Borehole Inspection Camera System
Product Description
Description
The camera probe is equipped with two cameras inside one hood. One is 360º rotable, the other is wide-angle.
New rotatable intelligent system, replacing the normal gear transmisson mechanism, totally avoid slipping phenomenon, so it performs more stable. One control button for direction, realizing Omni-scaning on all directions of the wall and downward, so as could cancel complex buttons of “Up,Down,Left,Right”.
The probe adopts SONY industrial grade WDR high-speed camera, 1200 million static pixel, 18 to 24 pieces of LEDs from USA Cree.
Waterproof ability: stainless steel shell, breakage-proof high transparent resin lens hood, so waterproof ability of the camera probe could be upto 1500 meters.
Specifications
| Sn. | Item | Paramerter |
| 1 | Sensor | 1/3 inch CCD,Industrial-grade wide dynamic high speed |
| 2 | Resolution | 1200TVL |
| 3 | Signal system | PAL |
| 4 | Minimum illumination | 0.001LUX/F1.2 |
| 5 | White Balance Mode | AWB |
| 6 | Backlight compensation | HLC |
| 7 | Working voltage | DC12V±5% |
| 8 | Static pixel | 1200 million |
| 9 | Light | 18-24 Pieces of LEDs from USA Cree |