DSHD-267 Cleveland Open Cup Flash Point Tester
Product Description
Brief description
DSHD-267 Open Cup Flash Point Tester is designed according the National Standard GB/T267 “Test Methods for Flash Point and Fire Point of P etroleum Products (Open Cup Methods)” and Industry Standard of Petrochemical SH/T0318 “Technical Requirements for Open Cup Flash Point Tester”.
DSHD-267 Open Cup Flash Point Tester is applies to determine the flash point and fire point of lubricating oil and Dark petroleum products.
Technical Data Sheet
Technical Data Sheet
| SN | | |
| 1 | Power supply | AC 220 V±10%,50Hz,Total power consumption is not more than 1100 W |
| 2 | Outer crucible | |
| 2.1 | Material | Carbon structural steel |
| 2.2 | Diameter of upper opening | Φ100±5 mm |
| 2.3 | Height | 50±5 mm |
| 2.4 | Diameter of bottom | Φ56±2 mm |
| 3 | Inner crucible | |
| 3.1 | Material:Carbon structural steel | Carbon structural steel |
| 3.2 | Diameter of upper opening | Φ64±1 mm |
| 3.3 | Height | 47±1 mm |
| 3.4 | Diameter of bottom | Φ38±1 mm |
| 3.5 | Scale line | there is a line 12 mm away from the rim of upper opening and a line 18 mm away from the rim of upper opening |
| 4 | Gas tube | the diameter of nozzle isΦ0.8~Φ1 mm. The inner surface of tube is smooth and it can adjust flame to 3 to 4 mm |
| 5 | Heater | Heated by an electric furnace. Heating power is 1000 W and adjustable |
| 6 | Thermometer | 0~360 °C; each scale division is 1 °C. It conforms to GB/T514 |