DSHD-3536D Fully Automatic Cleveland Open Cup Flash Point Tester ASTM D92
Product Description
DSHD-3536D Fully Automatic Cleveland Open Cup Flash Point Tester ASTM D92
Summary
The DSHD-3536D Fully Automatic Cleveland Open Cup Flash Point Tester complies with ASTM D92, ISO 2592, and GB/T 3536. It determines the flash and fire points of petroleum products with flash points above 79°C, excluding fuel oils. As a fully automatic model, it handles the entire test sequence without operator intervention: automatic heating rate control, electronic ignition, flash point detection, automatic fire extinguishing, and Bluetooth data transmission to a PC or printer. This makes it suitable for higher throughput laboratories where manual operation is not practical. Typical samples include engine oils, gear oils, and industrial oils.
The DSHD-3536D Fully Automatic Cleveland Open Cup Flash Point Tester complies with ASTM D92, ISO 2592, and GB/T 3536. It determines the flash and fire points of petroleum products with flash points above 79°C, excluding fuel oils. As a fully automatic model, it handles the entire test sequence without operator intervention: automatic heating rate control, electronic ignition, flash point detection, automatic fire extinguishing, and Bluetooth data transmission to a PC or printer. This makes it suitable for higher throughput laboratories where manual operation is not practical. Typical samples include engine oils, gear oils, and industrial oils.
Technical Data Sheet
I. Main technical features
1. This instrument is a kind of fully-automatic instrument wich can do determination for both flash point and fire point.
2. This instrument adopts technology of single chip microcomputer and LCD screen.Full English man-machine dialog interface. It can preset the parameters of expected flash point,sample mark number, atmospheric pressure, test date,etc.It has menu to prompt and input function of guide type.
3. This instrument adopts desktop structure and advanced design.The man-machine interface make it easy to use.And the test result is accurate.It can be widely used in railway,aviation,electric power, petroleum industry and colleges,scientific research institutes,measurement departments to do determination of flash point and fire point for petroleum products.
II. Main technical specifications
| SN. | Item | Parameter |
| 1 | Power supply | AC 220V(-10%～+5%), 50 Hz |
| 2 | Temperature measurement | Temperature measurement |
| 2.1 | Full scale | Room temperature～400℃ |
| 2.2 | Repeatability | ≤4℃ |
| 2.3 | Reproducibility | ≤8℃ |
| 2.4 | Resolution | 0.1 ℃ |
| 2.5 | Accuracy | 0.5% |
| 3 | Temperature rising speed | Conform to GB/T3536 |
| 4 | Flame application | Electronic ignition ; gas flame is about 3.2~4.8 mm in length |
| 5 | Ambient temperature | 10℃~40℃ |
| 6 | Relative humidity | ≤80%; |
| 7 | Total power consumption | Not more than 500 W |
| 8 | Dimension | |
| 8.1 | When test arm doesn’t raise up | 520mm×360mm×310mm |
| | When test arm raised up | 520mm×360mm×420mm |