You are here: Home » Products » Petroleum Analysis Instrument » Flash Point Tester » DSHD-5208 Rapid Closed Cup Flash Point Tester

Product Category

Share to:

DSHD-5208 Rapid Closed Cup Flash Point Tester

Less time, less sample
Equiped semiconductor refrigerator, for super low flash point samples.
  • Range: -30~50℃
  • Standards: GB/T 5208

Product Description

DSHD-5208 Rapid Closed Cup Flash Point Tester
I. Scope of application
This instrument is designed and made as per GB/T 5208-2008 Determination of flash point - Rapid equilibrium closed cup method.It also correspond with ISO 1523 and ISO 3679. 
This instrument adopts advanced electric temperature controller as the core.It is equipped with proper interface circuit to realize the automation of temperature control.It has the functions of automatic switchover of heating power and automatic temperature control. This instrument is easy to operate, having reasonable structure, accuracy detection, stable performance and direct display. It is the ideal substitution of imported instruments.It can meet the requirements of rapid determination for closed cup flash point of petroleum products in oil,chemical, varnish, paint, railway, aviation, electricity, commercial inspection and science research institution. 
This instrument is especially suitable to determine the products such as colored paint,oil paint, adhesive,solvent,petroleum and other relevant products which flash point is -30℃~50℃.

Technical Data Sheet

 I. Main technical features
 1.Designed as per GB/T 5208-2008 Determination of flash point - Rapid equilibrium closed cup method. It can

     realize purpose of testing closed cup flash point rapidly and at low temperature.
 2.The instrument adopts semiconductor refrigeration device and external water cooling device. The size is

     small and cooling rate is rapid, Easy to operate.
 3.Test sample needed is less.2ml for each time(4ml for solid sample and semi-solid sample)
 4.The determination procedure is automatically completed except ignition. Test results can be printed automatically.

 II. Main technical specifications and parameters

SN.  Item  Parameter
1  Power supply                                      AC(220±10%)V, 50Hz                                            
2  Flash point measuring range                                       -30℃~50℃                                        
3  Precision of determination 
3.1  Absolute difference same operator)  Lower than 2℃
3.2  Absolute difference(different operators)  Lower than 3℃
4  Temperature control precision  ±0.5℃
5  Igniting device  Electric igniting gun
6  Cooling mode  Semiconductor(with cold water cycle at external connection)
7  Maximum power consumption  300W
8  Ambient temperature              5℃~30℃              
9  Relative humidity  30%~80%
10  Dimension  370mm×280mm×280mm
11 Gas source  LGP or civil gas


 Our company can customize instruments with different ranges of low-temperature flash point according to customer's need.

Tel: 86-756-8305811  Email: admin@dshing.com  
Copyright  2016 Dshing Instrument Co.,Ltd. All rights reserved.    Site Map   Hot Links